UNIFEI › SIGAA - Sistema Integrado de Gestão de Atividades Acadêmicas Itajubá, 24 de Setembro de 2025
  • Formação acadêmica indisponível no momento. Não foi possível estabelecer um contato com o serviço.

antonio carlos ancelotti junior

IEM - INSTITUTO DE ENGENHARIA MECÂNICA

Produção Intelectual

Artigos (63)

  • 2023, Diego Morais Junqueiraa Mechanical Engineering Institute, Universidade Federal de Itajubá (UNIFEI), Itajubá, Brazil,Matheus Brendon Francisco,João Luiz Junho Pereira,Antonio Carlos Ancelotti Jr. &Guilherme Ferreira Gomes , Dynamic experimental study of nitinol wire-reinforced composite structures, ISSN: 1537-6532
  • 2023, BORTOLUZZI, DANIEL BRIGHENTI, DINIZ, CAMILA APARECIDA, RIBEIRO JUNIOR, RONNY FRANCIS, FRANCISCO, MATHEUS BRENDON, Antonio Carlos Ancelotti Junior, GUILHERME FERREIRA GOMES , An Experimental Characterisation on Rectangular Z-Pinned Parameters in the Dynamic Modal Responses of Reinforced Composites, ISSN: 0929189X
  • 2023, BRIGHENTI BORTOLUZZI, DANIEL, APARECIDA DINIZ, CAMILA, JUNHO PEREIRA, JOÃO LUIZ, RIBEIRO JUNIOR, RONNY FRANCIS, FERREIRA GOMES, GUILHERME, Antonio Carlos Ancelotti Junior , On the influence of rectangular Z-pins parameters on mode II delamination resistance of through the thickness reinforced composites, ISSN: 02638223
  • 2022, DI BENEDETTO, RICARDO MELLO, GUILHERME FERREIRA GOMES, JANOTTI, ANDERSON, Antonio Carlos Ancelotti Junior, BOTELHO, Edson Cocchieri , Statistical approach to optimize crashworthiness of thermoplastic commingled composites, ISSN: 23524928
  • 2022, KANE, DAOUDA, GOMES, GUILHERME, MACANHAN, VANESSA, Antonio Carlos Ancelotti Junior , The effect of ply drop-off on tensile strength of thermoplastic carbon fiber composite: a numerical and experimental study, ISSN: 02644401
  • 2022, DI BENEDETTO, RICARDO MELLO, JANOTTI, ANDERSON, GUILHERME FERREIRA GOMES, Antonio Carlos Ancelotti Junior, BOTELHO, Edson Cocchieri , Development of hybrid steel-commingled composites CF/PEEK/BwM by filament winding and thermoforming, ISSN: 02663538
  • 2021, OLIVER, GUILHERME ANTONIO, PEREIRA, JOÃO LUIZ JUNHO, FRANCISCO, MATHEUS BRENDON, Antonio Carlos Ancelotti Junior, GUILHERME FERREIRA GOMES , Parameter tuning for wavelet transform-based damage index using mixture design, ISSN: 01770667
  • 2021, BORTOLUZZI, DANIEL BRIGHENTI, OLIVER, GUILHERME ANOTONIO, Antonio Carlos Ancelotti Junior, GUILHERME FERREIRA GOMES , An experimental dynamic analysis of Z-pinned unidirectional CFRP beams, ISSN: 02638223
  • 2021, RODRIGUES, VICTOR DE CARVALHO, HIRAYAMA, DENISE, Antonio Carlos Ancelotti Junior , The effects of residual organic solvent on epoxy: modeling of kinetic parameters by DSC and Borchardt-Daniels method, ISSN: 16785169
  • 2021, DI BENEDETTO, R.M., BOTELHO, E.C., JANOTTI, A., Antonio Carlos Ancelotti Junior, GOMES, G.F. , Development of an artificial neural network for predicting energy absorption capability of thermoplastic commingled composites, ISSN: 02638223
  • 2020, Guilherme Antonio Oliver, Antonio Carlos Ancelotti Junior, Guilherme Ferreira Gomes , Neural network-based damage identification in composite laminated plates using frequency shifts, ISSN: 09410643
  • 2020, BARBOSA, LORENA CRISTINA MIRANDA, DUQUE, GABRIEL ROBERTO VIEIRA, Antonio Carlos Ancelotti Junior , Temperature-frequency-dependent properties analysis of a bio-composite based on a new liquid thermoplastic resin reinforced with jute fibers, ISSN: 08927057
  • 2020, FARIA, LUCAS, GUILHERME FERREIRA GOMES, GOMES DE SOUSA, SARA RAQUEL, BOMBARD, ANTONIO, Antonio Carlos Ancelotti Junior , Dynamic experimental behavior of sandwich beams with honeycomb core filled with magnetic rheological gel: A statistical approach, ISSN: 09641726
  • 2020, BRITO JÚNIOR, CARLOS ALBERTO RIOS, PARDINI, LUIS CLAUDIO, Antonio Carlos Ancelotti Junior , Obtenção das constantes elásticas efetivas sob condição dinâmica de um laminado híbrido para uso aeronáutico, ISSN: 15177076
  • 2020, GUILHERME FERREIRA GOMES, DE ALMEIDA, FABRICIO ALVES, Antonio Carlos Ancelotti Junior, DA CUNHA, SEBASTIÃO SIMÕES , Inverse structural damage identification problem in CFRP laminated plates using SFO algorithm based on strain fields, ISSN: 01770667
  • 2020, LUIZ LARA OLIVEIRA, THIAGO, ZITOUNE, RÉDOUANE, Antonio Carlos Ancelotti Junior, CUNHA JR., SEBASTIÃO SIMÕES DA , Smart machining: Monitoring of CFRP milling using AE and IR, ISSN: 02638223
  • 2020, DE ANDRADE RAPONI, OLIVIA, BARBOSA, LORENA CRISTINA MIRANDA, JUNIOR, JOSÉ EVERARDO BALDO, Antonio Carlos Ancelotti Junior, GUIMARÃES, ALESSANDRO , Effects of the exposition of an autoclave prepreg to the processing environment on its properties, curing cycle and final composite behavior, ISSN: 02683768
  • 2020, PEREIRA, PAULO, JANÉ, DARIO ALMEIDA, Antonio Carlos Ancelotti Junior , Experimental Study of the Acoustoelastic Effect on Woven Carbon/Epoxy Composites, ISSN: 00903973
  • 2019, DI BENEDETTO, R.M., BOTELHO, E.C., GOMES, G.F., JUNQUEIRA, D.M., Antonio Carlos Ancelotti Junior , Impact energy absorption capability of thermoplastic commingled composites, ISSN: 13598368
  • 2019, BARBOSA, LORENA CRISTINA MIRANDA, SANTOS, MONIQUE, OLIVEIRA, THIAGO LUIZ LARA, GUILHERME FERREIRA GOMES, Antonio Carlos Ancelotti Junior , Effects of moisture absorption on mechanical and viscoelastic properties in liquid thermoplastic resin/carbon fiber composites, ISSN: 00323888
  • 2019, BARBOSA, LORENA CRISTINA MIRANDA, BORTOLUZZI, DANIEL BRIGHENTI, Antonio Carlos Ancelotti Junior , Analysis of fracture toughness in mode II and fractographic study of composites based on Elium® 150 thermoplastic matrix, ISSN: 13598368
  • 2019, RAPONI, OLIVIA DE ANDRADE, BALDO JUNIOR, JOSÉ EVERARDO, LEITE, PALOMA DE SOUZA, Antonio Carlos Ancelotti Junior, GUIMARÃES, ALESSANDRO , Prepreg aging effects on its properties, curing process and final composite behavior characterized by dynamic mechanical analysis, ISSN: 07316844
  • 2019, RAPONI, OLIVIA DE ANDRADE, SOUZA, BÁRBARA RIGHETTI DE, BALDO JUNIOR, JOSÉ EVERARDO, Antonio Carlos Ancelotti Junior, GUIMARÃES, ALESSANDRO , Dielectric analysis as a low-complexity methodology for tracking prepreg out-time and its effects on the curing cycle, ISSN: 00219983
  • 2019, LUIZ LARA OLIVEIRA, THIAGO, NEVES, FREDERICO OZANAN, DE PAULA, THALITA CRISTINA, Antonio Carlos Ancelotti Junior , Heat Treatment and Lubrication Analysis of the Surface Integrity of Cold Extruded Metals, ISSN: 22886206
  • 2019, DINIZ, CAMILA APARECIDA, CUNHA, SEBASTIÃO SIMÕES, GUILHERME FERREIRA GOMES, Antonio Carlos Ancelotti Junior , Optimization of the Layers of Composite Materials from Neural Networks with Tsai-Wu Failure Criterion, ISSN: 15477029
  • 2019, DE SOUZA ELOY, FELIPE, GUILHERME FERREIRA GOMES, Antonio Carlos Ancelotti Junior, DA CUNHA, SEBASTIÃO SIMÕES, BOMBARD, ANTONIO JOSÉ FARIA, JUNQUEIRA, DIEGO MORAIS , A numerical-experimental dynamic analysis of composite sandwich beam with magnetorheological elastomer honeycomb core, ISSN: 02638223
  • 2019, JUNQUEIRA, DIEGO MORAIS, GUILHERME FERREIRA GOMES, SILVEIRA, MÁRCIO EDUARDO, Antonio Carlos Ancelotti Junior , Design Optimization and Development of Tubular Isogrid Composites Tubes for Lower Limb Prosthesis, ISSN: 0929189X
  • 2019, DE SOUZA, ANGELO, GUILHERME FERREIRA GOMES, PERES, ERIC PERES, ISAÍAS, JOSÉ CLÁUDIO, Antonio Carlos Ancelotti Junior , A numerical-experimental evaluation of the fatigue strain limits of CFRP subjected to dynamic compression loads, ISSN: 02683768
  • 2019, GUILHERME FERREIRA GOMES, DE ALMEIDA, FABRICIO ALVES, JUNQUEIRA, DIEGO MORAIS, DA CUNHA, SEBASTIAO SIMÕES, Antonio Carlos Ancelotti Junior , Optimized damage identification in CFRP plates by reduced mode shapes and GA-ANN methods, ISSN: 01410296
  • 2018, GUILHERME FERREIRA GOMES, DIAZ MENDÉZ, YOHAN ALÍ, SILVA LOPES ALEXANDRINO, PATRÍCIA DA, DA CUNHA, SEBASTIÃO SIMÕES, Antonio Carlos Ancelotti Junior , The Use of Intelligent Computational Tools for Damage Detection and Identification with an Emphasis on Composites - A Review, ISSN: 02638223
  • 2018, GUILHERME FERREIRA GOMES, DE ALMEIDA, FABRICIO ALVES, DA CUNHA, SEBASTIAO SIMÕES, Antonio Carlos Ancelotti Junior , An estimate of the location of multiple delaminations on aeronautical CFRP plates using modal data inverse problem, ISSN: 02683768
  • 2018, Guilherme Ferreira Gomes, Antonio Carlos Ancelotti Junior, Sebastião Simões Cunha Júnior , RESIDUAL STRESS PREDICTION IN POROUS CFRP USING ARTIFICIAL NEURAL NETWORKS, ISSN: 21522057
  • 2018, DE SOUZA ELOY, FELIPE, GUILHERME FERREIRA GOMES, Antonio Carlos Ancelotti Junior, DA CUNHA, SEBASTIÃO SIMÕES, BOMBARD, ANTONIO JOSÉ FARIA, JUNQUEIRA, DIEGO MORAIS , Experimental dynamic analysis of composite sandwich beams with magnetorheological honeycomb core, ISSN: 01410296
  • 2018, GUILHERME FERREIRA GOMES, DA CUNHA, SEBASTIAO SIMÕES, Antonio Carlos Ancelotti Junior , A sunflower optimization (SFO) algorithm applied to damage identification on laminated composite plates, ISSN: 01770667
  • 2018, RAPONI, OLIVIA DE ANDRADE, BARBOSA, LORENA CRISTINA MIRANDA, DE SOUZA, BÁRBARA RIGHETTI, Antonio Carlos Ancelotti Junior , Study of the influence of initiator content in the polymerization reaction of a thermoplastic liquid resin for advanced composite manufacturing, ISSN: 07306679
  • 2018, BORTOLUZZI, DANIEL BRIGHENTI, GUILHERME FERREIRA GOMES, HIRAYAMA, DENISE, Antonio Carlos Ancelotti Junior , Development of a 3D reinforcement by tufting in carbon fiber/epoxy composites, ISSN: 02683768
  • 2018, Diego Morais Junqueira, MÁRCIO EDUARDO SILVEIRA, Antonio Carlos Ancelotti Junior , Analysis of spot weld distribution in a weldment numerical simulation and topology optimization, ISSN: 02683768
  • 2018, DE ANDRADE RAPONI, OLIVIA, RIGHETTI DE SOUZA, BÁRBARA, MIRANDA BARBOSA, LORENA CRISTINA, Antonio Carlos Ancelotti Junior , Thermal, rheological, and dielectric analyses of the polymerization reaction of a liquid thermoplastic resin for infusion manufacturing of composite materials, ISSN: 01429418
  • 2018, GUILHERME FERREIRA GOMES, Fabrício Alves de Almeida, Patrícia da Silva Lopes Alexandrino, Bruno Silva de Sousa, Sebastião Simões Cunha Júnior, Antonio Carlos Ancelotti Junior , A multiobjective sensor placement optimization for SHM systems considering Fisher information matrix and mode shape interpolation, ISSN: 01770667
  • 2018, GUILHERME FERREIRA GOMES, DA CUNHA, SEBASTIAO SIMÕES, DA SILVA LOPES ALEXANDRINO, PATRICIA, SILVA DE SOUSA, BRUNO, Antonio Carlos Ancelotti Junior , Sensor placement optimization applied to laminated composite plates under vibration, ISSN: 1615147X
  • 2018, Guilherme Ferreira Gomes, Sebastião Simões Cunha Júnior, Antonio Carlos Ancelotti Junior , A Review of Vibration Based Inverse Methods for Damage Detection and Identification in Mechanical Structures Using Optimization Algorithms and ANN, ISSN: 11343060
  • 2018, DE SOUSA, BRUNO SILVA, GUILHERME FERREIRA GOMES, JORGE, ARIOSTO BRETANHA, DA CUNHA, SEBASTIÃO SIMÕES, Antonio Carlos Ancelotti Junior , A modified topological sensitivity analysis extended to the design of composite multidirectional laminates structures, ISSN: 02638223
  • 2018, Guilherme F. Gomes, Yohan Alí Díaz Méndez, Patricia da Silva Lopes Alexandrino, Sebastião Simões da Cunha Jr., Antonio Carlos Ancelotti Junior , A Review of Vibration Based Inverse Methods for Damage Detection and Identification in Mechanical Structures Using Optimization Algorithms and ANN, ISSN: 11343060
  • 2018, DI BENEDETTO, RICARDO MELLO, RAPONI, OLÍVIA DE ANDRADE, DIEGO MORAIS JUNQUEIRA, Antonio Carlos Ancelotti Junior , Crashworthiness and Impact Energy Absorption Study Considering the CF/PA Commingled Composite Processing Optimization, ISSN: 19805373
  • 2018, GUILHERME FERREIRA GOMES, MENDÉZ, YOHAN ALÍ DIAZ, DA CUNHA, SEBASTIÃO SIMÕES, Antonio Carlos Ancelotti Junior , A numerical-experimental study for structural damage detection in CFRP plates using remote vibration measurements, ISSN: 21905479
  • 2017, DENISE HIRAYAMA, SARON, CLODOALDO, BOTELHO, Edson Cocchieri, COSTA, MICHELLE LEALI, Antonio Carlos Ancelotti Junior , Polypropylene Composites Manufactured from Recycled Carbon Fibers from Aeronautic Materials Waste, ISSN: 15161439
  • 2017, SOUZA, BÁRBARA RIGHETTI, DI BENEDETTO, RICARDO MELLO, HIRAYAMA, DENISE, Olivia de Andrade Raponi, BARBOSA, LORENA CRISTINA MIRANDA, Antonio Carlos Ancelotti Junior , Manufacturing and Characterization of Jute/PP Thermoplastic Commingled Composite, ISSN: 15161439
  • 2017, GUILHERME FERREIRA GOMES, DINIZ, CAMILA APARECIDA, DA CUNHA, SEBASTIÃO SIMÕES, Antonio Carlos Ancelotti Junior , Design Optimization of Composite Prosthetic Tubes Using GA-ANN Algorithm Considering Tsai-Wu Failure Criteria, ISSN: 15477029
  • 2017, Olivia de Andrade Raponi, RAPONI, RAFAEL DE ANDRADE, BARBAN, GABRIEL BISSARO, BENEDETTO, RICARDO MELLO DI, Antonio Carlos Ancelotti Junior , Development of a Simple Dielectric Analysis Module for Online Cure Monitoring of a Commercial Epoxy Resin Formulation, ISSN: 15161439
  • 2017, GONÇALVES, VANDERLEI O., Pardini, Luiz Claudio, Antonio Carlos Ancelotti Junior , Fatigue under Shear Stress by Using the Iosipescu Method for Carbon/Epoxy Composites, ISSN: 2234991X
  • 2016, Fabíola Ottoboni Yamane, Gabriel Bissaro Barban, Juliana Alves da Silva, Sebastião Simões da Cunha Júnior, Denise Hirayama, Antonio Carlos Ancelotti Junior , Fatigue Behavior of Carbon/Epoxy Composites Produced by VARTM: Thermography, Frequency and Stress Level, ISSN: 22502459
  • 2016, Guilherme Ferreira Gomes, Sebastião Simões da Cunha Júnior, Antonio Carlos Ancelotti Junior , Structural Damage Localization in Composite Plates Using Finite Element Method and Optimization Algorithm, ISSN: 19918178
  • 2016, Camila Aparecida Diniz, Sebastião Simões Cunha Jr., Antonio Carlos Ancelotti Junior, Guilherme Ferreira Gomes, Rodrigo Bicalho, Rafaella Barrêto Campos , Otimização Estrutural De Elementos Em Compósitos Usando Redes Neurais Artificiais, ISSN: 24476102
  • 2016, Guilherme Ferreira Gomes, Sebastião Simões Cunha Júnior, Antonio Carlos Ancelotti Junior , Crack Detection in Composite Laminated Plates Using Optimization Techniques Based in Changes in Natural Frequencies, ISSN: 24552143
  • 2016, Guilherme Ferreira Gomes, Sebastião Simões Cunha Júnior, Antonio Carlos Ancelotti Junior , Damage detection in aeronautical profile by using frequency changes and optimization algorithms, ISSN: 19838409
  • 2016, Guilherme Ferreira Gomes, Sebastião Simões Cunha Júnior, Antonio Carlos Ancelotti Junior, Mirian de Lourdes Nonhora Motta Melo , Damage Detection in Composite Materials Via Optimization Techniques Based on Dynamic Parameters Changes, ISSN: 22502459
  • 2015, Luciana krauss Rezende, Carlos Alberto Máximo Pimenta, Wiliam César Alves Machado, Antonio Carlos Ancelotti Junior, Gustavo Torres Carneiro , The Perception of Transtibial Amputees Regarding the Use of Prostheses, ISSN: 23197714
  • 2014, Antonio Carlos Ancelotti Junior, NORONHA MELO, M.L.M., GONÇALVES, V.O., Kledermon Garcia, Pardini, L.C. , Experimental Methodology for Limit Strain Determination in a Carbon/Epoxy Composite under Tensile Fatigue Loading, ISSN: 16629752
  • 2014, DA SILVA, ALINE, RODRIGUES, CARLOS ALBERTO, Antonio Carlos Ancelotti Junior, OTONI CORRÊA, EDMILSON, NORONHA MELO, M.L.M. , Effect of Solubilization Temperature on the Sigma Phase Precipitation of a Superduplex Stainless Steel, ISSN: 16629752
  • 2010, Antonio Carlos Ancelotti Junior, Pardini, Luiz Claudio, Eduardo Marcelo Bezerra, Roach, Dennis , Use of the mar-lin criteria to determine the influence of porosity on the iosipescu and short beam shear properties in carbon fiber polymer matrix composites, ISSN: 15161439
  • 2009, Vanderlei O. Gonçalves, Luiz Cláudio Pardini, Kledermon Garcia, Antonio Carlos Ancelotti Junior, Eduardo Marcelo Bezerra , Resistência ao Cisalhamento Iosipescu em Compósitos de Fibra de Carbono e de Vidro com Resina Epóxi, ISSN: 21759146
  • 2007, Brito Júnior, C.A.R., Bezerra, E.M., Pardini, L.C., Antonio Carlos Ancelotti Junior, Pereira, M.S., De Barros, E., De Camargo, L.R. , Redes neurais artificiais aplicadas para a predição do comportamento dinâmico-mecânico de compósitos de matriz epóxi reforçados com fibras de carbono, ISSN: 15177076
  • 2007, Eduardo Marcelo Bezerra, Antonio Carlos Ancelotti Junior, Luiz Cláudio Pardini, Koshun Iha, José Atílio Fritz, Carlos Henrique Costa Ribeiro , Artificial Neural Networks Applied to Epoxy-Composites Reinforced with Carbon and E-Glass Fibers:Analysis of the Shear Mechanical Properties, ISSN: 09215093

Trabalho de Fim de Curso(15)

  • Caracterização térmica e mecânica de compósitos de matriz polimérica reforçada com fibra de vidro, Ana Julia Vasconcelos Moreira , 05/2019
  • Projeto de um sistema de alinhamento para próteses para membros inferiores usando critério vida segura., Renato Leão De Lello , 07/2019
  • Estudo da absorção de água por filmes de isolamento via análise dielétrica, Leticia Laura de Oliveira , 12/2019
  • Estudo e caracterização de compósitos à base de resina termoplástica líquida (Elium 150₢)reforçadas com fibras de Sisal., Gabriel Roberto Vieira Duque , 12/2019
  • Efeito do condicionamento higrotérmico nas propriedades de cisalhamento no plano de compósitos à base de resina Elium 150/fibras, Monique Pereira dos Santos , 12/2019
  • EXOESQUELETO PASSIVO PARA AUXÍLIO AOS MEMBROS INFERIORES DURANTE O MOVIMENTO DE CAMINHADA, Pedro Felipe do Espírito Santo Garcia , 12/2022
  • Estudo da influência de parâmetros do processamento de extrusão nas propriedades de compostos de polipropileno reforçados com fibra de vidro, Cibele Cristina Leite , 12/2021
  • RECICLAGEM DE RESÍDUOS DE PRÉ-IMPREGNADOS NÃO CURADOS A PARTIR DA UTILIZAÇÃO DE SOLVENTE A BASE DE ACETONA, Samuel Monteiro Pandolpho , 07/2022
  • UTILIZAÇÃO DE SOLVENTES ORGÂNICOS NA RECUPERAÇÃO DAS FIBRAS DE CARBONO DE RESÍDUOS PRÉ-IMPREGNADOS , Daniele Melo Costa , 07/2022
  • ANÁLISE ESTRUTURAL NUMÉRICA E OTIMIZAÇÃO DE MOLAS ORTOTRÓPICAS NA CONFIGURAÇÃO DE PRATOS, Matheus Azevedo Soares , 12/2023
  • Estudo Comparativo de Drop-off em Compósito Termorrígido e Termoplástico Aplicado em Estruturas Aeronáuticas, Estefânia Roessel Zielinski Moura , 08/2017
  • Projeto e Análise de Fadiga da Caverna de Pressão Traseira em Alumínio 2024-T3 com Abordagem Safe-Life para uma Aeronave de Transporte Civil, Antonio Lopes Rosado Filho , 11/2018
  • Procedimentos Técnicos e Administrativos para Criação de uma Empresa de Manutenção Aeronáutica, Lucas Barea Peron , 07/2019
  • Análise da Influência da Orientação das Camadas de um Compósito no Tempo de Captação de Ruídos Provenientes de Impactos, Nícholas Modesto da Fraga Candido , 11/2017
  • ANÁLISE ESTRUTURAL DE UMA PRÓTESE PARA MEMBRO INFERIOR (PÉ) DE FIBRA DE CARBONO/EPÓXI  , PAUL LAURENT RAGUENEAU , 12/2024

Orientações de Pós-Graduação (46)

  • Mestrado Profissional, THIAGO DE FREITAS SILVANO, 11/2023 - , Concluída em 09/2024
  • Mestrado Profissional, THIAGO DE FREITAS SILVANO, 11/2023 - , Concluída em 09/2024
  • Mestrado Profissional, HUGO BARBOSA FACO, 08/2024 - , Orientação em Andamento
  • Doutorado, RICARDO MELLO DI BENEDETTO, 10/2016 - , Concluída em 02/2019
  • Doutorado, DANIEL BRIGHENTI BORTOLUZZI, 08/2018 - , Concluída em 02/2022
  • Doutorado, DANIEL BRIGHENTI BORTOLUZZI, 08/2018 - , Concluída em 02/2022
  • Doutorado, PAULO VICTOR DE ASSIS, 10/2024 - , Orientação em Andamento
  • Doutorado, IBHADODE OISEHOEMOMEN, 10/2024 - , Orientação em Andamento
  • Doutorado, THIAGO LUIZ LARA OLIVEIRA, 03/2021 - , Concluída em 08/2021
  • Doutorado, THIAGO LUIZ LARA OLIVEIRA, 03/2021 - , Concluída em 08/2021
  • Doutorado, DARIO DE ALMEIDA JANÉ, 06/2016 - , Concluída em 08/2018
  • Doutorado, LORENA CRISTINA MIRANDA BARBOSA, 07/2016 - , Concluída em 03/2020
  • Doutorado, LORENA CRISTINA MIRANDA BARBOSA, 07/2016 - , Concluída em 03/2020
  • Doutorado, DAOUDA KANE, 10/2016 - , Concluída em 12/2019
  • Doutorado, DAOUDA KANE, 10/2016 - , Concluída em 12/2019
  • Doutorado, OLIVIA DE ANDRADE RAPONI, 11/2017 - , Concluída em 10/2019
  • Doutorado, OLIVIA DE ANDRADE RAPONI, 11/2017 - , Concluída em 10/2019
  • Doutorado, FELIPE DE SOUZA ELOY, 07/2016 - , Concluída em 10/2018
  • Doutorado, TOMAS BARBOSA DA COSTA, 08/2022 - , Orientação em Andamento
  • Doutorado, DIEGO MORAIS JUNQUEIRA, 09/2018 - , Concluída em 03/2023
  • Doutorado, ANGELO DE SOUZA, 11/2018 - , Concluída em 04/2023
  • Doutorado, DIEGO MORAIS JUNQUEIRA, 09/2018 - , Concluída em 03/2023
  • Doutorado, ANGELO DE SOUZA, 11/2018 - , Concluída em 04/2023
  • Doutorado, FERNANDA MAGALHÃES DE OLIVEIRA CAMPOS, 01/2019 - , Orientação em Andamento
  • Mestrado, MATHEUS HIPOLITO ALMEIDA TORNELI, 03/2017 - , Concluída em 06/2019
  • Mestrado, LUIZ GUSTAVO FERRARO, 06/2017 - , Concluída em 07/2017
  • Mestrado, OLIVIA DE ANDRADE RAPONI, 06/2016 - , Concluída em 02/2017
  • Mestrado, DIEGO MORAIS JUNQUEIRA, 06/2016 - , Concluída em 02/2018
  • Mestrado, YULLIAN DEIVIS ALVARADO VILLAREAL, 11/2015 - , Concluída em 09/2016
  • Mestrado, ANGELO DE SOUZA, 08/2012 - 04/2013 , Concluída em 04/2013
  • Mestrado, ANAEL PEREIRA FILHO, 12/2015 - , Concluída em 02/2017
  • Mestrado, ALEX ALVES NUNES DE SANTANA, 02/2012 - 12/2014 , Concluída em 12/2014
  • Mestrado, GUSTAVO GEORGE LEITE TORRES, 03/2020 - 08/2021 , Orientação em Andamento
  • Mestrado, Rubens Augusto Carvalho Rafanhim, 03/2023 - , Orientação em Andamento
  • Mestrado, FELIPE EDUARDO RIBEIRO SILVA, 02/2020 - , Concluída em 03/2024
  • Mestrado, FELIPE EDUARDO RIBEIRO SILVA, 02/2020 - , Concluída em 03/2024
  • Mestrado, CARLOS EUSTAQUIO DOS SANTOS NEVES, 07/2021 - , Concluída em 09/2023
  • Mestrado, CARLOS EUSTAQUIO DOS SANTOS NEVES, 07/2021 - , Concluída em 09/2023
  • Mestrado, Tamara Aparecida Carvalho Ribeiro, 06/2019 - , Concluída em 03/2022
  • Mestrado, Tamara Aparecida Carvalho Ribeiro, 06/2019 - , Concluída em 03/2022
  • Mestrado, CRISTIAN IALEN ESTEVÃO, 03/2015 - , Concluída em 11/2017
  • Mestrado, CRISTIAN IALEN ESTEVÃO, 03/2015 - , Concluída em 11/2017
  • Mestrado, LUCAS EDUARDO RIBEIRO FARIA, 06/2018 - , Concluída em 10/2020
  • Mestrado, LUCAS EDUARDO RIBEIRO FARIA, 06/2018 - , Concluída em 10/2020
  • Mestrado, MATHEUS HIPOLITO ALMEIDA TORNELI, 03/2017 - , Concluída em 06/2019
  • Mestrado, DANIEL BRIGHENTI BORTOLUZZI, 10/2016 - , Concluída em 02/2016

SIGAA | DTI - Diretoria de Tecnologia da Informação - (35) 3629-1080 | Copyright © 2006-2025 - UFRN - dev.unifei.edu.br.sigaa-atualizacao vSIGAA 4.12.14_U.144